12 VDC to 24 VDC Power Up-Converter non-isolated

Brand :
Article number:
1st16DD_12-24_072-RU
Availability:
Out of stock
Delivery time:
10 business days (Austria), 12 business days (Europe), 15 business days (others)
€146,00 * Incl. tax Excl. Shipping costs
Quantity :
+ -
  • Information
  • Reviews
  • Product Tags

12 VDC to 24 VDC Power Up-Converter non-isolated

Please select from the above options:

Power:
  • 72 W
  • 168 W
  • 240 W
  • 400 W
  • 600 W
Protection-class IP65:
  • Yes
  • No

Product Description:

If you need to fit 24V equipment onto a 12V electrical system, then an "up" converter from the DD Series offers a fast and easy way to configure your system. With a range from 72W (3A output) to 600W (25A output), these products offer state of the art designs for fast installation and long term reliable operation.

Fast Installation:

All products fit onto a “Click ‘n’ Fit” mounting clip which is fixed in three points allowing it to be mounted on uneven surfaces.  It is easy to fit the clip into awkward places and then simply click the unit into position.

Technical Data:

Input voltage range

12 VDC nominal (10.0V-15.0V)

Output voltage

27,2 VDC +/-5% at extremes of temperature, load, input tolerance, etc.

Continuous current rating

3 A - 25 A depending on model.

Intermittent rating

Continuous rating +20%, taken for a maximum of 2 minutes followed by 8 minutes rest

Transient voltage protection

Meets ISO7637-2 International standard for 24 VDC commercial vehicles

Electrostatic voltage protection

Meets ISO10605, ISO14892, >8 kV contact, 15 kV discharge

Output noise

<100mV pk-pk at continuous load. 

Off load current (quiescent current)

<20m A (400 W and 600 W versions enable off), less than 100 mA (72-240 W units)

Power conversion efficiency

Typically: 93%

Operating temperature

-25ºC to +30ºC to meet this specification table

+30ºC to +80ºC de rate linearly to 0 A

Storage temperature

-25ºC to +70ºC

Operating humidity

95% max., non-condensing

Casework

Anodised aluminium, glass filled polycarbonate, dust water and impact resistance to IP533.

Ruggedized versions also available to IP65

Connections

Four 6,3 mm push on flat blade connectors (72-240 W)

Five terminal connector with screw tightening with mating half supplied (400 and 600 W units)

Output indicator

Green LED adjacent to output terminals

Mounting method

‘Click ‘n' fit mounting clip, fitted separately using 3 hole fixing (4 hole on 400 and 600 W)

Safe area protection:

Over current

 

Limited by current sensing circuit

Over heat

Limited by temperature sensing circuit

Transients

Protected by filters and rugged component selection

Input / Output over voltage protection

Controlled by internal circuitry

Catastrophic failure

Protected by internal input and output fuses

Approvals

2004/108/EC The general EMC directive

2006/96/EC The automotive directive

93/68/EEC The CE marking directive

Markings

CE and e marked


0 stars based on 0 reviews
* Incl. tax Excl. Shipping costs