Support / Contact Us
0
Close

Categories

Filters

    48 VDC to 12 VDC Converter isolated

    €117,-* 0 pcs on stock; delivery within 3 weeks
    48 VDC to 12 VDC Converter isolated... Show more
    4 variations Power: 36 W, Protection-class IP65: Yes

    Product description

    These devices are housed in a rugged, corrosion resistant anodized aluminum housing. The low mass of the surface mount technology components offer excellent resistance to shock and vibration, thereby improving the reliability of these products will continue to increase. For simplicity during installation and acceleration for debugging the output is displayed to the transducer by a green LED. With the T-shaped mounting bracket, the power supply can be installed quickly and easily.

    Technical Data:

    Input voltage rangeAuto-Select, 85-135 VAC and 170-265 VAC, 47-440Hz
    Output voltage options13,6 VDC, 27,2 VDC or 54,4 VDC, as ordered . Worst case limits are +/- 4%
    Output noise<50mV pk-pk at continuous load
    Power Conversion EfficiencyTypically 85%
    Isolation between input and case/output Isolation casework to ground1,5 kVAC/3,0 kVAC rms, Connected directly to mains input ground
    Normal operating temperature-25ºC to +30ºC to meet this specification table +30ºC to +70ºC de-rate linearly to 0A
    Storage Temperature-25ºC to +100ºC
    Max case temperature70ºC at full load with 25ºC ambient
    Operating humidity95% max, non-condensing
    CaseworkAnodized aluminium
    Connections:
    Input
    OutputGround
    IEC-320 C14 socket, C13 terminated cordset 6.3mm push-on blade terminals Stud with crimp eyelet, adjacent to input
    Output IndicatorGreen LED adjacent to output terminals
    Mounting Method‘ Click ‘n’ Fit’ mounting clip or rubber feet. DIN rails clips available as a special order
    Safe area protection:
    Over Current
    Over heat
    Over voltage
    TransientsCatastrophic failure

    Limited by current sensing circuit
    Limited by temperature sensing circuit
    Protected by independent shut down circuit
    Protected by filters and rugged component selection
    Approvals2004/108/EC The general EMC directive 2006/95/EC The low voltage directive 93/68/EEC The CE marking directive
    Tested toEN50081-1, EN50082-1, EN55014-1, EN61000-3-3, EN60950, EN60945, UL1950, CSA950-95, VDE0805
    MarkingsCE

    Manufacturer information

    • Manufacturer: Alfatronix Limited
    • Partnumber: DDi_48-12_072

    Specifications

    Article number
    1st16DDi_48-12_036-RU

    Reviews

    0 from 5Based on 0 reviews
    Create your own review

    There are no reviews written yet about this product..

    For your information:

    Here you see comparable items purchased by other customers.

    Compare 0

    Add another product (max. 5)

    Start comparison

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »