Support / Contact Us
0
Close

Categories

Filters

    230 VAC Battery charger for 12-24 VDC

    €272,-* 0 pcs on stock; delivery within 3 weeks
    230 VAC Battery charger for 12-24 VDC... Show more
    4 variations Output Voltage: 24 VDC, Power: 300 W

    Product description

    This Intelligent Battery Chargers offer an ideal way of charging any type of lead acid battery safely and reliably. The rugged, fully protected unit (IP65) can be used in a variety of applications including on commercial ships, mega yachts, vehicles, and in depots and workshops.

    This Series is suitable for all types of lead acid batteries. Charging is through a 3 stage system. The first stage is the bulk charging phase. This state is indicated when the yellow LED is illuminated and continues through stage 2 of the process. When the current is below 10% of maximum output, the charger automatically adjusts to reduce the output voltage to reliably top up the battery. At this stage the green LED is illuminated indicating that the battery is fully charged. Should the voltage level fall below the nominal values during the maintenance stage, the charger will go back to step one and repeat the process.

    The charger is enclosed in a rugged, anodized aluminum extrusion protected from dust, damp and impact to IP65. The unit can be installed practically anywhere, on commercial ships, mega yachts, vehicles, and in depots and workshops.

    Technical information

    Input voltage range180 VAC – 270 VAC (reduced output below 170 VAC)
    Input over voltage285 VAC
    Output voltage (12V units)13,5 VDC – 14,5 VDC according to charge cycle (STD 14,4)
    Output voltage (24V units)26,8 VDC – 29,0 VDC according to charge cycle (STD 28,8)
    Power conversion efficiencyTypically 88-91%
    Off load current<2 mA
    Operating temperature-30 °C - +55 °C
    Storage temperature-55 °C - +85 °C
    CaseworkAnodised aluminium, dust, water and impact protected to IP65
    ConnectionsInput - IEC lead, Output – Flying lead
    Output indicatorsYellow and green LEDs according to cycle
    Mounting methodBy 4 screws
    Safe area protection:  
    Over currentCurrent limited to maximum ratings of each model
    Over heatInternal control to reduce output in over temperature situations
    TransientsProtection both on input and output
    Wrong polarity protectionWith fuse on output
    Approvals2004/108/EC General EMC
     206/95 Low Voltage Directive
     93/68/EEC CE Mark
    Designed to EN61204-3, EN60335-2-29, EN 55022B
    MarkingsCE

    Manufacturer information

    • Manufacturer: Alfatronix Limited
    • Partnumber: IC_230-24_108

    Specifications

    Article number
    1st16IC_230-24_300

    Reviews

    0 from 5Based on 0 reviews
    Create your own review

    There are no reviews written yet about this product..

    For your information:

    Here you see comparable items purchased by other customers.

    Compare 0

    Add another product (max. 5)

    Start comparison

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »