USB-A and / or USB-C - Charger for Smartphones on board of a yacht (12 / 24 VDC)

USB-A and / or USB-C - Charger for Smartphones on board of a yacht (12 / 24 VDC) with electronics protected to IP65. Easy installation in just 5 minutes. Crew or Passengers can access the charging facility directly and power their equipment simply through the USB charging lead which is supplied with all such products.

available Variants(please select from pull down lists)

• Surface or Wall thickness
  • equal or less then 9 mm surface thickness
  • more than 9mm  
• Number and Type of required USB Connectors
  • USB-A Single
  • USB-A Double
  • USB-C Single
  • USB-A and USB-C Dual

Construction

• Yacht Voltage 12 VDC and 24 VDC systems
• Up to 2.1 A output (single) 3.0 A (double) max 1.5 A per socket
• Apple and Android compatible
• Dashboard, slim-line seat back or under seat pod configurations
• LED output indicator
• CE and E Marked

Technical Information

• Input voltage range [VDC]: 9 - 32
• Output voltage [VDC]: 5,2 +/- 0.2
• Output Power [A]:
  • Single USB-A: 2.1
  • Double USB-A: 3.0
  • Single USB-C: 2.5
  • Dual USB-A & USB-C: 3.6
• Application: Charging of USB devices including Apple and Android
• Transient voltage protection: Meets ISO7637-2 International standard for 12/24 VDC vehicles
• Output noise [mV]: <50mV pk-pk
• Off load current (quiescent current) [mA]: <2.5
• Isolation: Non-isolated >400Vrms between casing and terminals
• Power conversion efficiency: 90%
• Operating temperature [°C]: -25 to +55 to meet this specification table
• Storage temperature [°C]: -25 to +100
• Operating humidity [%]: 95 max., non-condensing
• Casework: Dark grey polycarbonate body, contrasting trim ring
• Connections
  • Input [mm]: 6.3 push-in flat blade connectors
  • Output: USB-A single/double socket, USB-C socket
• Output indicator: Blue LED output indication
• Mounting method: 30mm diameter hole, with rear nut or front fit bezel
• Safe area protection
  • Over Current: Limited by current sensing circuit
  • Over heat: Limited by temperature sensing circuit
  • Overvoltage and Undervoltage: Limited by sensing circuit
  • Reverse Polarity: Protected by sensing circuit
  • Transients: Protected by filters and rugged component selection
  • Catastrophic protection: Internal fuse (external fusing recommended)
• Approvals:
  • 2014/30/EU The general EMC directive
  • Regulation 10 The automotive directive
  • 93/68/EEC The CE marking directive
  • IP65 approved (Electronics protected to IP65)
  • Regulation R118 (Automotive Fire)
  • EN61373 vibration
• Designed to: EN50498, ISO 7637-2, R118 & R080
• Markings: CE, UKCA and E marked

Product Videos

Manufacturer information

• Manufacturer: Alfatronix Limited
• Partnumber: PVPWpAFF